Learn how to hem curtains by sewing in seven easy steps.

Here’s what you’ll need suggested by Curtain pole manufacturer :

Tape measure or yardstick
Iron
Ironing board or large flat, padded surface
Straight pins
Fabric scissors
Sewing machine or hand-sewing needle
Thread to match your curtains
Step 1: Hang Curtains
First, find the optimal length for your curtains by hanging them in the desired window of your home.

Hanging curtains can take time, but know that you don’t have to settle for traditional curtain hardware that requires nails, screws, measuring and drilling.

Kwik-Hang makes damage-free curtain rod brackets that help you hang your curtains fast in just three easy steps. Simply align Kwik-Hang’s brackets to your window trim, tap them in place and insert your curtain rod and panels to determine how much hemming you need to do.

Step 2: Pull Curtains
After putting up your curtains, make sure they hang straight with no creases.

Pull the fabric gently towards the floor to see the exact length. Be careful not to stretch it too tightly. It’s crucial to observe how much excess material you have so you can hem your curtains accurately.

Step 3: Pin Curtains
Now, place straight pins where you would like to hem the curtains. But first, decide if you want your curtains to float, kiss or puddle on the floor:

Float: The curtains “float” less than one inch above the floor. A good option if you want your curtains to hang straight down without a break.
Kiss: The curtains graze the floor. This style is challenging to hang correctly, as it requires precise measurements. Remember to accommodate for the length of the curtain rods and curtain rings (if any) you’re using.
Puddle: Longer curtains that flare out on the floor. This style is romantic, feminine and old-world, ideal for drapery in formal rooms. Use high-quality, thick fabric like velvet or linen.
How wide should the hem be? Always allow for a double-folded hem. This prevents the rough fabric edge from showing when you cut your curtains and creates a neat and clean appearance.

Longer curtains need longer hems and shorter curtains need shorter hems to look proportional:

Standard floor-length curtains should have a three to four-inch hem, plus another three to four inches for the double fold. Your curtains should then be six to eight inches longer than where you place your pins.
Apron-length curtains should have a two-inch hem plus allowance for the double fold, so add four inches to your curtain length.
Example: Let’s say your window needs 84-inch curtains, but you found curtains you love that are only available in a 96-inch length. Don’t automatically cut off 12 inches! Here’s what the calculation would look like to shorten your curtains:

96-inch curtain
Subtract 3 inches for the hem
Subtract 3 inches for the double fold
= 6 inches required for the hem and double fold
96 – 6 = 90 inches required
Cut off 6 inches
Pro-tip: Unless your curtains are longer than they should be, consider hemming instead of cutting. If you make a mistake or decide to use the curtains in another room, you can undo the hem and re-hem them to the size you need.

Step 4: Measure Length for Sewing
Use your tape measure or yardstick to ensure that the straight pins align evenly.

Keep in mind that most floors aren’t perfectly leveled, so double-check measurements and straightness.

Step 5: Fold and Iron Hem
Next, fold and iron twice: once for the double-fold and once for the hem. Fold the fabric evenly for the double-fold and pin into place. Make sure to fold back toward the wrong side of the curtain. Iron the double-fold firmly.

Then, fold the curtain along the original pin line for the hem. Use the straight pins to continue to hold the hem in place. Iron across, slowly and firmly to secure the fold of the hem. You can remove the straight pins once you finish ironing.

Step 6: Sew Curtains
You can sew by hand or use a sewing machine to secure the newly measured hem on your curtains. Aim to sew as close to the double-folded edge as possible.

Step 7: Rehang Curtains
Once you sew the hem, it’s time to rehang the finished product. Give the curtains another quick press with your iron before putting them back up.

Check out the best finishing touches to add to your newly tailored curtains.

As Curtain rods can be customized to the manufacturer, welcome to your come and purchase!