Take a passenger elevator as an example:

1. The passenger elevatoris equipped with landing doors, car running direction indicators, math display car, running position indicator and passenger elevatorcall button at each service landing. When using the passenger elevator call button, press the up direction button when going upstairs, and press the direction button when going downstairs. When the car arrives, the floor direction indicator shows the direction of movement of the car. Passengers judge the direction they want to go and enter the car after confirming that the passenger elevator is normal. Pay attention to the closing of the door leaf and do not stay at the docking place between the landing door and the car door.
2. There are position indicator, control panel, door open/close button and floor selection button in the car. After entering the car, press the floor selection button of the desired floor. If you want the car door to close immediately, you can push the door close button. The car floor position indicator shows that it has arrived at the floor and can leave after the car door is opened. The passenger elevatorhas a rated load of 13 people, and it cannot be overloaded. Please exit when people are overloaded.
3. Passenger elevators cannot be used as freight passenger elevatorfrequently, and it is absolutely not allowed to transport flammable and explosive products. When an abnormal phenomenon or malfunction occurs in the passenger elevator, keep calm, call the rescue call in the car, and do not pry the door without authorization in an attempt to escape from the car. Passengers are not allowed to rely on the car door, smoking and littering in the car, and keep the car clean and hygienic. Passengers should take good care of the passenger elevator factory, and must not press buttons and pry the doors randomly.
4. Drivers must strictly perform their job duties, and must not stay away from their jobs during passenger elevatoroperation, and handle and report faults in a timely manner. Drivers are not allowed to use the inspection and emergency stop buttons as the cancellation call signal before the normal operation starts; it is not allowed to use the inspection speed when the floor or car door is opened; it is not allowed to open the car top trap door and safety door; no It is allowed to load and transport over-long objects at the inspection speed; it is not allowed to use the opening and closing of the manual car door as the starting or stopping function of the passenger elevator; it is not allowed to change direction suddenly during exercise. The driver should always check the passenger elevatoroperation, regularly contact the passenger elevator for maintenance, and keep a record of maintenance.
5. When the passenger elevatoris out of use, the driver should stop the car at the base station, turn off all the switches on the operating panel, and close the landing doors. In case of a power outage notice, the Passenger Elevator Factoryshould be stopped in advance.