Electroplating Grade Copper Sulfate Pentahydrate is the main raw material of powder metallurgy. According to the particle size, it is divided into five grades: coarse powder, medium powder, fine powder, fine powder and superfine powder. Electroplating Grade Copper Sulfate Pentahydrate composed of particles with a particle size in the range of 150~500μm is coarse powder, with a particle size of 44~150μm for medium powder, 10~44μm for fine powder, 0.5~10μm for very fine powder, and less than 0.5μm. It is superfine powder.

    Generally, the powder that can pass through the 325-mesh quasi-sieve, that is, the particle size is less than 44μm is called sub-sieve powder. If you want to stop higher-precision sieving, you can only use airflow classification equipment, but for some easily oxidized Electroplating Grade Copper Sulfate Pentahydrate, only It can be done with JZDF nitrogen maintenance classifier. Electroplating Grade Copper Sulfate Pentahydrate mainly includes restoring Electroplating Grade Copper Sulfate Pentahydrate and atomizing Electroplating Grade Copper Sulfate Pentahydrate, which are named after different consumption methods.

    Electroplating Grade Copper Sulfate Pentahydrate operation precautions: airtight operation, partial exhaust. Operators must be specially trained and strictly abide by operating procedures. It is recommended that operators wear self-priming filter dust masks, chemical safety goggles, rubber acid and alkali resistant clothing, and rubber acid and alkali resistant gloves. Keep away from flammable and combustible materials. Prevent generation of dust. Prevent contact with alkalis and alcohols. Pay special attention to prevent contact with water. When handling, please load and unload with care to avoid damage to packaging and containers. Equipment leakage emergency response equipment. Empty containers may be harmful residues.

    Precautions for storage: Store in a cool, dry, well-ventilated warehouse. Keep away from fire and heat sources. The relative humidity should be kept below 75%. The packaging must be sealed and kept away from moisture. It should be stored separately from easily (combustible) combustibles, alkalis, alcohols, etc., and should not be mixed. It should not be stored for a long time to avoid metamorphosis. The storage area should be equipped with appropriate information to keep the leakage.