Most of the appearance of Escalator Supplier and moving walks are made of stainless steel. In order to maintain the gorgeousness and cleanliness of stainless steel parts and prolong the service life of stainless steel parts, the surface of stainless steel must be cleaned and maintained correctly.

The stainless steel components of escalators and moving walks mainly include floor panels, skirts, inner/outer covers, handrail frames, steps, etc. At the same time, according to the special requirements of some customers, sometimes special surface treatment stainless steel may be used, such as Color-plated stainless steel, sandblasted stainless steel, stainless steel surface electrophoresis, etc. In this article, the author mainly introduces the maintenance of stainless steel parts of escalators and moving walks during installation, maintenance during daily use, and some special treatment countermeasures under improper use.

During the installation process of escalators and moving walks, avoid heavy objects hitting or pressing the stainless steel parts, and the protective film cannot be removed. As the stainless steel parts of escalators and moving walks are relatively thin, they must be protected from collisions, squeezing, scratches, etc. during transportation and installation, otherwise the stainless steel parts may be deformed and scratched, affecting their aesthetics.

Try not to remove the protective film on the stainless steel surface before escalators and moving walks are handed over to users. However, the protective film will experience aging, which will leave a paste trace on the surface of the stainless steel plate after aging. Generally speaking, the protective film in the packaged state is effective for a certain period of time at room temperature and a certain humidity. However, due to different specific conditions, such as wind and sun, heat, pressure, etc., the film’s service life cannot be guaranteed. , So it is necessary to determine the time to tear off the film according to the specific situation, so as not to leave mushy marks. After the protective film is removed, the stainless steel surface of China escalator company must be cleaned and maintained correctly.