There are many types of 4x8 pvc foam board , including PVC hard board, PVC transparent board, PVC soft board (coiled material), PVC welding rod, PVC plastic board, PVC foam board, etc., each of which has its own characteristics and its application range is also different. . With the continuous development of economy, PVC board has been widely promoted and used, and its products include pipes, shoe soles, toys, doors and windows, wire sheaths, stationery, etc. But the PVC board will become dirty after a long time. How to clean up the PVC board? Let's take a look.
　　 PVC board cleaning agents include cleaning agents: water-based degreaser, spray cleaning maintenance wax, strong black offset remover, strong glue remover and so on.
　　1. Daily maintenance: Use a clean 90% dry mop to clean the PVC board, and clean the parts with serious pollution;
　　2, monthly maintenance: waxing treatment of the damaged surface of the partial foundation. Especially the homogeneous PVC board is generally waxed and cured once a month;
3. Pollution treatment: the stained ink, food, greasy, etc. on the PVC board should be wiped off, and then use a diluted detergent to scrub the traces. If the remaining black leather shoe prints are difficult to remove, you can use a veil and loose perfume to scrub. Pour the pine perfume on the PVC board to clean it, and after scrubbing, it must be waxed for maintenance;
　　4. Note: You can't use cleaning balls, knives, and dirt that cannot be cleaned by conventional methods to clean PVC boards. Consult relevant people. Do not use acetone, toluene, and other chemicals.
5. Chemical protection: avoid a large amount of water staying on the surface of the PVC board for a long time. If the water soaks the floor for a long time, it may penetrate under the PVC board to melt the PVC board and lose its adhesion, and it may also cause the protective wax on the surface of the PVC board. The delamination causes the pollution of the PVC board, and the sewage may penetrate into the PVC board and cause the PVC board to change color;
　　6. ​​Sun protection: Avoid direct exposure to strong light, and make the PVC board irradiate ultraviolet rays to prevent the PVC board from discoloring and fading.

If you are interested in wpc foam board, you can contact us if you are interested.