In order to ensure the safety of the Manual Fertilizer Seeder, the oil in the fuel tank should be replaced in time. Because the oil will produce impurities after long-term use, it will cause a burden on the engine; secondly, check the operating quality of the Manual Fertilizer Seeder frequently, and promptly if any problems are found Investigate and deal with; and do the daily maintenance of the equipment, and frequently maintain and scrub the Manual Fertilizer Seeder.
　　Operators must operate strictly in accordance with the requirements of the manual, master the operating methods and standards, and cannot use and operate blindly. Before starting the Manual Fertilizer Seeder, it is necessary to check whether the engine fuel and cooling water are full, whether the gearbox lubricating oil is sufficient, and carefully check whether the screws of each part are loose, falling or there is oil leakage. Loose.
　　 During the operation, the operator must use a low-level throttle, control the clutch, and start slowly to ensure safe operation. When the Manual Fertilizer Seeder is fueling, the engine needs to be turned off. Smoke and fire are strictly prohibited on site to prevent fire.
　　Manual Fertilizer Seeder will remove the dust, debris, various steel cables and other movable parts from the heat dissipation part of the engine every season. After cleaning, add lubricating oil or butter to ensure normal operation in the coming year. The final thing to pay attention to is that the posture of the Manual Fertilizer Seeder must be correct, and the feet must not be close to the cutter to avoid injury to the feet when the engine is used. When Corn Sheller starts, make sure that no one can work in front of the machine.