If there is no water pump, water will not flow from the tank to the plants and back to the plants. Therefore, it is important to choose high-quality pumps for hydroponic systems. Xizi Submersible Pump Factory provides a wide range of pump options.

For large and complex systems, a large number of watt pumps are required to run continuously. Some smaller systems will work well with the smallest wattage, and if you want to lower your electricity bill, this is certainly a better choice. Some pumps are equipped with a timer to ensure that the electricity is always running, and if you choose to be completely energy-efficient, you can even use a solar pump.

100 liters of water should be pumped per hour, but this will vary depending on factors such as the length of the pump. When choosing a water pump, you should not only pay attention to how much water will be pumped per hour but also pay attention to its maximum pumping capacity.

It is best to choose a pump that is stronger than the one you need because you can slow down the water flow by adding a valve. On the other hand, please be careful not to choose too strong a pump to overuse it, as this will consume too much electricity.

The pump also has a venturi tube, which basically ensures that the required air enters the water. The pump propeller is one that completes all the work, sucking water through the pipe. The filter in front of the propeller protects it to ensure that nothing gets stuck in the fan blades. The filter needs to be cleaned once a week.

Oil-free and copper-exposed pumps are safe for fish. The impeller shaft made of stainless steel will help its longer service life, so the easily disassembled Stainless Steel Submersible Pump meets these conditions and will make your cleaning work easier.