The automatic chainsaw is a common hand-held saw, which is mainly used for logging and lumbering. Its working principle is to cut through the transverse movement of the L-shaped blades on the saw chain. Electric saw is a kind of demolition equipment. According to the function and driving mode, it can be divided into motor chain saw, non-motor chain saw, concrete chain saw, etc. If the working time of the electric saw is too long, it is easy to cause loss, then how do we maintain the electric saw?
Correct use of the electric saw 1. Before the electric saw works, let it run at low speed for a few minutes, and watch the electric saw to lubricate the chain oil to weigh an oil line before starting to work. When working, the throttle can be set to use at high speed. After working on a tank of oil, you need to rest for a period of time, roughly 10 minutes. After the work is completed, the heat sink of the chainsaw needs to be cleaned to ensure the normal heat dissipation of the machine.
- The air filter of the electric saw needs to be dusted every 25 hours. If you encounter special circumstances, you can deploy it by yourself. The foam filter element can be cleaned by washing liquid or gasoline, and then cleaned with water, squeezed to dry, and then soaked in engine oil, squeezed out the excess engine oil to install.
- When using a new chainsaw, pay attention to the tightness of the saw chain, so that it can push the saw chain to rotate, use a hand-held saw chain, and the guide teeth are parallel to the guide plate. After a few minutes of use, pay attention to observe again and repeat this several times. . When using a chainsaw, make sure that there are no creatures within 20 meters, and check whether there are hard objects, rocks, etc. on the grass to ensure safety. When the chainsaw needs to be left unused, clean the machine body, drain the mixed fuel, and burn out the fuel in the vaporizer; remove the spark plug, add 1-2ml of two-stroke engine oil to the cylinder, pull the starter 2-3 times, install Put on the spark plug.
Oute Tools Manufacturing Co., Ltd. has rich experience in custom chain saw, you are welcome to contact us.
